HMC-H Oil Mold Temperature Controller


Basic introduction
Model definition
Special Features
Note
  • HMC series mold temperature machine is used for the temperature regulation of the plastic forming mold and the extrusion forming drum.The temperature of the mold and the drum is controlled with high precision by heating and cooling control.


  • Type Unit HMC-6H HMC-9H HMC-12H HMC-18H HMC-24H HMC-6H-D HMC-9H-D HMC-12H-D
    Medium   High temperature conducting oil
    Max temp   180℃
    Heat power kW 6 9 12 18 24 6x2 9x2 12x2
    Pump power kW 0.37 0.75 0.75 1.5 2.2 0.37x2 0.75x2 0.75x2
    Max pump flow L/min 42 56 135 160 315 42x2 56x2 135x2
    Max pump pressure Bar 2.8 3.8 2.5 2.7 3.0 2.8 3.8 2.5
    Cooling method   Indirect cooling
    Mould coupling   3/8”(2x2) 3/8”(2x2) 3/8”(4x2) 3/8”(6x2) 3/8”(6x2) 3/8”(2-2x2) 3/8”(2-2x2) 3/8”(2-4x2)
     
    Dimensions  
    H mm 695 695 745 855 805 695 695 745
    W mm 310 310 350 350 350 620 620 700
    D mm 805 835 935 965 965 815 845 945


    Type Unit HMC-9HT HMC-12HT HMC-18HT HMC-24HT
    Medium   High temperature conducting oil
    Max temp 300℃
    Heat power kW 9 12 18 24
    Pump power kW 0.5 1 2.8 2.8
    Max pump flow L/min 30 58 80 80
    Max pump pressure Bar 5 5.5 10 10
    Cooling method   Indirect cooling
    Cooling water pipe inch 1/2” 1/2” 1/2” 1/2”
    Circulation oil pipe inch 1/2”(2x2) 1/2”(2x2) 3/4”(2x2) 3/4”(2x2)
     
    Dimensions  
    H mm 785 785 945 945
    W mm 390 390 390 390
    D mm 950 950 970 970


    Note

  • The standard voltage is 3 Phase, 380V, 50 Hz.
  • Refer to the heating capacity to select the machine.
  • Have any special needs, please contact us.
  • We reserve right to change specifications without prior notice.