HGB Gravimetric Blenders


Basic introduction
Model definition
Special Features
Note
  • HGB series gravimetric blenders for injection molding, extrusion or hollow molding process used for a variety of raw materials by weight ratio of precision mixing use of the occasion.The series of product controller using the Austrian B & R control system, and the use of adaptive algorithms, in the first boot can be automatically calibrated to ensure accurate accuracy, easy to learn and easy to learn.
  • The series of products using high-precision AD conversion module to make the batch mixing ratio error (depending on the size ratio of the set ratio) can be controlled at ± 0.1% to 0.5%.According to the need to deal with the type of material and the amount of each hour to choose the appropriate model, the amount of processing per hour from 40 to more than 4000 kg.


  • Type   HGB-1 HGB-2
    -4 -3 -2 -6 -5 -4 -3 -2
    Group Number   4 3 2 6 5 4 3 2
    Max. Output Kg/Hr 50 60 130 100 120 160 180 360
    Knife metering value Set 4 3 2 4 4 4 3 2
    Trace metering value Set - - - 2 1 0 0 0
    Max. Throughput Kg 1 2
    Mixing motor power W 90 90
    Storage hopper L 12 40
    Weighing bucket capacity L 2 8
    Mixing warehouse capacity L 8 18
    The biggest batch quantity Hr 50 60 130 50 60 80 90 180
    Dimensions mm 1150×800×650 1650×900×1300 1650×900×1050 1650×900×820



    Type   HGB-5 HGB-10 HGB-25
    -6 -5 -4 -3 -2 -6 -5 -4 -3 -2 -6 -5 -4 -3 -2
    Group Number 6 5 4 3 2 6 5 4 3 2 6 5 4 3 2
    Max. Output Kg/Hr 250 300 400 450 900 670 700 900 1000 1800 1500 1750 2000 2500 4000
    Knife metering value Set 4 4 4 3 2 6 5 4 3 2 6 5 4 3 2
    Trace metering value Set 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    Max. Throughput Kg 5 10 25
    Mixing motor power W 200 370 750
    Storage hopper L 48 100 150
    Weighing bucket capacity L 12 32 65
    Mixing warehouse capacity L 25 60 120
    The biggest batch quantity Hr 50 60 80 90 180 60 70 90 100 180 60 70 80 100 160
    Dimensions mm 1850×1000×1500 1850×1000×1250 1850×1000×1000 2400×1200×1200 3000×1600×1600


    Note

  • The mixing ratio error is the difference between the setting percentage and the actual percentage;
  • The knife metering valve is suitable for the proportion of 5% and above, the mixing ratio error can be controlled in ±0.3-0.5%;
  • Screw or micro-meter suitable for 5% to 0.5% ratio, mixing ratio error can be controlled in ±0.2%;
  • The maximum throughput and the mixing ratio error data are based on the continuous density of 0.8 kg/L and the diameter of 3-4 mm. The maximum output will vary according to the number and proportion of the metering group;
  • Please ensure the valve pressure 6kgf/cm² ;
  • Standard voltage: HGB-5 and below models 1 Phase, 220V, 50 Hz, HGB- 10 and above models 3 Phase, 380V, 50Hz;
  • Have any special needs, please contact us;
  • Specifications are subject to change without prior notice.